Home internet packaged plans from local internet service providers rarely come without their own issues. Whether it’s Verizon’s “unlimited data” plans that throttle your speeds after you hit a certain usage, Comcast’s bandwidth caps, or AT&T’s U-verse connection issues, almost everyone has had to deal with a home internet issue at some point.
We’ve all been there: You’ve just sat down to watch your favorite show on Netflix, only to find yourself crawling at a snail’s pace, or an error warning that says no internet secured even if you try resetting your modem, but nothing changes.
Below, you will find some of the most common issues with home internet connections and quick fixes so you can get back to enjoying your shows as soon as possible.
One of the most common problems with home internet connections is ISP throttling. This is when your internet service provider deliberately slows down your speeds, usually after you’ve reached a certain usage limit.
This is done to prevent overloading the infrastructure and causing issues with other users. While throttling can be frustrating, there are ways around it:
Check your usage regularly to Avoid ISP Internet Throttling.
With everything in our homes having wireless connectivity of one form or another, exceeding your monthly data limits according to your contract is far from unusual.
Once you’ve hit a certain limit (usually between 100 GB to 150 GB), your ISP will start throttling your speeds. You can avoid this by keeping an eye on how much data you’re using, so you can adjust your habits as needed.
Use a VPN To Fix ISP Data Throttling ( Quick!)
A virtual private network (VPN) can help you get around ISP throttling by encrypting all of your traffic and routing it through a separate server. This will make it appear as if you’re not using as much data, allowing you to stream without throttling.
Be aware that VPNs can cause speed issues, especially if you’re playing online games or streaming in HD. There’s also the possibility of your data being logged by the VPN provider, so make sure to do some research before signing up.
If you’re looking for a good VPN service to get around ISP throttling, I recommend checking out TorGuard.
Modem Not Secured Error:
If you’re seeing an error message that says “This device is not secure”, it means that your modem isn’t properly set up to connect to the internet. This can be caused by a number of things, including incorrect settings, a damaged modem, or outdated firmware.
To fix this issue, you’ll need to access your modem’s settings and correct the problem. This can vary depending on your modem, so I recommend checking your modem’s manual or contacting your ISP for help.
No Internet Secured Error:(How To Fix It Quick!)
The No Internet Secured Error is a similar error to the one mentioned above, but it means that there is a problem with your internet connection rather than your modem. This can be caused by a number of things, including a faulty router, incorrect settings, or a damaged cable.
To fix the no internet secured error issue, you’ll need to troubleshoot your internet connection and correct the problem. This can vary depending on your setup, so I recommend contacting your ISP for help.
Network Issues:(How To Fix It Quick!)
Depending on the time of day or how many people are using your network, you may run into problems with slow speeds or find it impossible to connect to the internet.
While there’s nothing you can do about other users on a shared network, there are a few things you can try to keep everything running as smoothly as possible:
Restart your router and modem To Fix Network Error Issues.
This is one of the simplest ways to fix most network issues. Simply unplug your router and modem, wait a few seconds, then plug them back in. This will reset both devices and often solves the problem.
Check your cables and connections To Fix Network Error Issues.
Make sure that all of your cables are plugged in properly and that none of them appear damaged. If you find damage, try replacing the cable with a new one.
This also applies to any wifi antennas on your router. If you have removable antennas, make sure they’re securely connected and aren’t damaged before using them again.
Try updating your router’s firmware To Fix Network Error Issues.
Many routers come with firmware updates that can improve your network’s performance.
To check for available updates, open your router’s admin page and look for the firmware update section.
If there are updates available, download and install them. This may take a few minutes, but it can often solve many common problems.
Upgrade your router To Fix Network Error Issues.
If your router is outdated or isn’t meeting your needs, consider upgrading to a newer model. This can be an expensive option, but it may be worth it if you’re experiencing frequent network issues.
I hope these tips help you get your internet back up and running! If you’re still having problems, don’t hesitate to contact your ISP for more help. I’ll update this guide periodically, so be sure to check back if anything changes.
Laptop Not Connecting to Wifi (How To Fix It Quick!)
With so many laptop brands offering punters a slew of different types, models and styles of laptops and notebook computers for varying usage and capabilities. The challenge for the majority of users is their laptop not connecting to Wifi when they need it the most.
As a general guide, laptop not connecting to Wifi issues can be caused by a number of things, including outdated drivers, incorrect settings, or a damaged Wifi antenna.
The complete guide focuses on the corrective steps you can take towards finding a solution to your laptop not connecting to the Wifi problem and having it back up and running as quickly as possible.
I will also highlight some of the tried and tested methods that other users have said to have worked for them.
If you think your laptop isn’t connecting due to incorrect Wifi settings or configuration, open up your laptop and check for any loose connections between your wifi antenna and the motherboard of your notebook computer.
This is a very easy option that doesn’t require much technical know-how nor will it take longer to fix it and put it back to work.
Spectrum Wifi Connected No Internet: (How To Fix It Quick!)
Spectrum Wifi is one of America’s leading cable internet providers. It boasts a wide coverage area with millions of subscribers using its service.
Despite the high number of users, Spectrum Wifi has been known to experience outages and connection problems, leaving customers without any internet access.
While Spectrum WIFI and its cable services remain reliable with low internet outages, finding yourself dealing with a problem like Spectrum’s flagship wifi internet not connecting is inevitable.
As a general guide, Spectrum Wifi connected but no internet issue is due to incorrect configuration, accidental turning WiFi OFF, and low Wifi signal strong enough to run a reliable internet connection
Consider restarting your laptop’s wifi to fix Spectrum Wifi connection issues. This will assist with most WiFi difficulties. Ensure that you have a good WiFi signal and that the WiFi is turned on. Make sure you’re in range of the network you want to connect to.
Open up your laptop and look for any loose connections between your wifi antenna and the motherboard of your notebook computer. This is a very easy option that doesn’t require much technical know-how nor will it take longer to fix it and put it back to work.
I have written a comprehensive guide and how to fix Spectrum Wifi Connection.
That’s why I will outline some methods that have proven to be successful in fixing Spectrum Wifi connected no internet problems.
The complete guide is separated into two parts: first, we’ll deal with laptops not connecting to Spectrum Wifi and secondly, methods to fix Spectrum Wifi connected but no internet service working.
No Internet Secured Windows 10 (How To Fix It Quick!)
Both Windows 10 or Windows 11 and beyond are commonly used operating systems for laptop and notebook computers.
While they offer a wide range of features, one issue that has been reported by users is the “No Internet Secured” warning message in Windows 10.
This problem generally crops up when trying to connect to a public WiFi network, such as in a café, restaurant or library. The warning says “There is no internet connection” and “The server doesn’t have a security certificate”.
This is a fairly common problem, and there are a few solutions that you can try.
If you’re using Windows 10, open up the Control Panel and go to Network and Internet > Network Connections.
Then, find your active WiFi connection, right-click it and choose Properties.
Navigate to the Sharing tab and select the box that says “Allow other network users to connect through this computer’s Internet connection”.
This will allow your laptop or notebook to share its internet connection with other devices, such as smart phones and tablets.
Once you’ve done this, open up your web browser and try connecting to the website you were having problems with. It should now work without any problems.
If this doesn’t work, or you’re using a different version of Windows, try restarting your router.
This will usually fix any connection issues that you’re experiencing. If it doesn’t, then you may need to speak to your internet service provider.
Spectrum Wifi Router Not Connecting (How To Fix It Quick!)
If you’re trying to connect to WiFi on your laptop but can’t seem to find an internet connection, there’s a good chance that your Spectrum Wifi router is the problem.
If this is the case, you should be able to connect to Spectrum Wifi if you have a data cable plugged into your laptop and connect directly to your router via an ethernet cable.
Make sure that no other devices are connected to your WiFi connection, as this can cause problems with the signal. Once you’ve done that, try restarting your router.
If this doesn’t work, you may need to call Spectrum and ask for support.
Xfinity Wifi Connected but No Internet Access (How To Fix It Quick!)
Xfinity is another popular internet service provider that offers WiFi to subscribers.
However, some of their customers have reported being connected to Xfinity Wifi but not having access to the internet with certain devices.
This is generally due to technical difficulties and not intermittent Wifi outage, and there are a few things you can do in order to fix it.
First, make sure that no other devices are connected to your Wifi connection.
If you’re trying to connect with your laptop or smartphone, open up your settings and make sure that the WiFi option is turned on.
Then, go into the network settings for your device and check the manual configuration. Once this has been done, enter in all available information, including the SSID and password for your WiFi connection.
If this still doesn’t work, try restarting your router.
This can resolve most technical problems within wireless networks. If it doesn’t, then you may want to consider calling Xfinity support in order to get help resolving your problem.
Hp Laptop Won’t Connect to Wifi (How To Fix It Quick!)
HP laptops are probably the most popular type of laptop on the market. They are affordable, reliable, and generally well-built.
However, they are prone to the occasional technical hiccup and one of these hiccups is having problems connecting your HP laptop to WiFi.
If this is an issue that you’ve been struggling with, then read on for some solutions that might be able to help you quickly resolve the problem.
Typically, HP laptops won’t connect to the wifi because the driver is outdated, or there is an issue with the wifi connection hardware onboard your HP laptop’s motherboard.
If you’re using Windows 10, open up the Device Manager and go to Network adapters. Find your WiFi adapter and right-click it, then choose Update Driver Software.
This will bring up a window where you can choose to Search Automatically for Updated Drivers best suited to your HP laptop.
If this doesn’t work, reboot your HP laptop and try again. Also, make sure that you have the most recent version of Windows installed on your computer before you begin.
A lot of times, HP laptops are just very slow at picking up updates for their drivers. If you’re using Windows 8 or older, you may have to try a third-party software in order to get your HP laptop to connect to wifi.
If all of these solutions fail, it’s possible that there is a hardware issue with your WiFi adapter and you will need to take your HP laptop in for repair.
Apple iPhone Won’t Connect To Wifi (How To Fix It Quick!)
With the proliferation of smartphones rising year after year, it’s no wonder that the average homes today have 2 Apple iPhones and 3-5 android smartphones.
At this rate, data usage in our homes is exponentially over the roof, leaving more and more people having trouble connecting their Apple iPhones to wifi networks.
As a general guide, an Apple iPhone won’t connect to Wifi due to low signal, lack of ISP provider data capacity to handle gadgets using the internet, incorrect home network setups, and permissions.
There are a few things you can do in order to try and fix your Apple iPhone’s wifi connection problems.
The first thing you should do is make sure that your Apple iPhone is running on the latest iOS software update.
You can check this by going to Settings > General > Software Update. If there are updates available, install them and then try reconnecting to your wifi network.
If that doesn’t work, try restarting your Apple iPhone.
It may just be having temporary issues connecting to wifi networks.
If that doesn’t work either, check your internet provider’s data capacity. If you have a limited amount of bandwidth, it’s possible that your ISP cannot handle the sudden increase in demand for data caused by the number of Apple iPhones being used in your home.
If you have unlimited data, then there are a few other things you can try. Go to Settings > Wi-Fi and forget the wireless network that you’re having problems connecting with.
Then reconnect to it, entering in all available information including the password if one is required.
If that still doesn’t work, make sure that your Apple iPhone is in a place where the signal is the strongest.
If there are walls or other objects blocking the signal, try moving your Apple iPhone to a place where it has a clear view of the wifi router.
And finally, if all of these solutions fail, it’s possible that there’s an issue with your Wi-Fi router.
You will need to take it in for repair or replace it altogether.
Ethernet Connected But No Internet (How To Fix It Quick!)
Ethernet technology is over 40 years old, but its still the most common type of internet connection used in homes today.
These days, it’s more likely for you to run into problems connecting to the internet with an Ethernet cable than without one. So if your Ethernet-connected computer or laptop is not connecting to the internet, here are some solutions that you can try.
The first thing you should do is reboot your router and modem.
Sometimes all it takes is a quick restart to get your devices up and running again.
If that doesn’t work, try unplugging your router and modem for about 30 seconds, then plugging them back in.
No Internet Secured Wifi (How To Fix It Quick!)
The no internet secure Wifi error may not be as common as some of the other errors on this list, but it can still be a real pain when it happens.
This error usually pops up when you’re trying to connect to a secure wifi network and means that either the password you’ve entered is incorrect or the network itself is not set up properly.
If you notice this error on your home network where you have Wifi permissions set up, the first thing you should do is check that you have not locked yourself out of your own wifi network.
To do this, go into your router and look for a page that lets you add or edit the permissions of devices on the network.
You’ll want to make sure that it’s set so that your home devices like iPhones, Laptops, or tablets can access it using your home Wifi password.
If you don’t have an internet connection, you can’t really do this.
If you’re connecting to a public wifi network, the password may have been changed since the last time you connected.
In this case, try contacting the owner of the network and asking them for the updated password.
If that still doesn’t work, it’s possible that there’s something wrong with the network itself.
You can try restarting your router and modem to see if that fixes the problem.
If it doesn’t, you will probably need to call a technician to take a look at it for you.
Laptop Can’t Connect To Wifi (How To Fix It Quick!)
As laptops use different Wifi chipsets than iPhones, iPads, and Apple TVs, you can run into problems connecting to the internet with your laptop that are specific to laptops.
If you suddenly find yourself unable to connect to wireless networks with your laptop, here are some things you can try.
First off, make sure that your laptop’s Wifi switch is turned on.
This is the little button or key on the side or front of your laptop that toggles Wifi on and off.
If it’s turned off, turn it on and try connecting again.
If that doesn’t work, go into your laptop’s settings and make sure that it is connected to the correct wireless network.
If you don’t know what the right wireless network is, try connecting to a few different ones and see if it works.
If this still doesn’t work, make sure that your router is working properly by unplugging it for about 30 seconds, then plugging it back in again.
Sometimes all you need to do to fix your laptop’s Wifi connection is to reset the router.
If that still doesn’t work, you may need to take your laptop in for repair.
Xfinity Wifi Connected but No Internet Access (How To Fix It Quick!)
Xfinity Wifi connected but no internet access when you have a subscription plan for your Xfinity Wifi service can be very frustrating.
As a general guide, your Xfinity Wi-Fi will say is “Connected due to faulty router, outdated firmware, ISP’s DNS resolver issues, dynamic IPV4 provisioning address issues, or filled cache storage on your device.
Fortunately, there are several things you can try when this happens to get yourself up and running in no time.
First off, make sure that your Xfinity router is turned on and connected to the correct cable modem.
If both of these devices are powered on but you’re still not getting internet, try unplugging them for about 30 seconds and then plugging them back in again.
Getting a static or dedicated IP address for your Xfinity modem may also help resolve this issue.
To do this, you will need to contact Comcast Support and request a static IP address for your modem.
If that still doesn’t work, try power cycling your Xfinity gateway.
This is done by unplugging the device for about 30 seconds, then plugging it back in.
If these steps don’t work, try resetting your Xfinity gateway to factory settings by holding down the reset button on the back or bottom of your gateway for about 30 seconds.
To learn more about Xfinity Wifi router login and password access visit xfinitywifi comcast support page.
Filled up Cache is that needs emptying is also the most common issue with Xfinity Wifi connected but no internet access.
This can be solved by deleting cache on your devices, or by restarting your devices.
On an iPhone or iPad, you can delete the cache by going to Settings > Safari > Clear History and Website Data.
For Android devices, you can clear the cache by going to Settings > Storage > Cached data > Clear cache.
If that doesn’t work, try creating a new profile on your device, then deleting the current profile that is having connection issues.
Laptop Can’t Connect to Wifi,
Experiencing an internet outage in your area is a much different problem to have than when a laptop can’t connect to Wifi.
For the latter, there are several things you can do to try and fix it.
First off, make sure that you have your Wifi switch turned on if your laptop has one.
If not, make sure that the Airplane mode is turned off.
Next, go into your laptop’s settings and connect to the correct wireless network.
If you don’t know which one is the right network, try connecting to a few of them and see if it works.
Make sure that your router is working properly and not blinking orange or blue light. If it is not working as it should, unplug it for about 30 seconds, then plug it back in again to reboot and reset the router.
Sometimes all you need to do to fix your laptop’s wifi connection is to reset the router.
If that still doesn’t work, go into your laptop’s settings and delete all network connections except for the one you’re currently using.
Then, add a new profile by going to Wireless Networks > Add Network> Advanced options > Manual setup > SSID: [enter a wireless network name] > Security type: [choose security type, e.g. WEP, WPA_PSK, etc.].
Then enter the password for that network under “Key or Pin” and save your new profile so you don’t have to do this again next time.
If none of these steps are helpful in fixing your problem, try to update your laptop’s drivers.
Wifi No Internet Secured,
As much as the Wifi no internet secured error is not known for its specificity, it does give you some clues as to what the issue might be.
As a general guide, Wifi no internet secured is caused by poorly configured network protocols inside Windows, modification of TCP/IP settings and network adapter card or software problems.
To fix this issue, you will need to go into your laptop’s device manager and uninstall your network adaptor drivers.
Then, download the latest version of your adaptor’s drivers from the manufacturer’s website and install it again. Or, try updating all of your device drivers by going to your Windows update menu and checking for updates.
If there are no new updates to install, try updating your laptop’s BIOS by going into your manufacturer’s website.
After that, go into network settings on your laptop and see if you can connect to the internet using Wifi. If not, you might need to reset your TCP/IP settings. To do this, go into your control panel and click on Network and Internet > Internet Options > Connections > LAN settings.
Uncheck “Automatically detect settings” and select “Use the following DNS server address”, then enter 188.8.131.52 as your primary DNS server address. Save your new settings and restart your computer.
Another way to fix the Wifi no internet secured error is by resetting your router back to its factory settings. To do this, disconnect the router from power for 30 seconds. Then, reconnect it while still holding down the reset button located on the back of the device.
After that, wait and try connecting to the internet. If that still does not work, the resetting process might not have worked and you should check your router manual or contact customer service for more help.
Mobile Hotspot Connected but No Internet,
With a reliable mobile hotspot connection, more and more workers are choosing to work remotely provided they have an internet connection.
While working remotely has its own perks, one of the most common problems that remote workers face is connectivity.
Problematic mobile hotspot connectivity is probably the most frustrating issue you can face when working remotely.
Typically, mobile hotspot connected but no internet error is due to Wifi and networks error. Access points on your mobile hotspot are not configured correctly.
The best way to fix this problem is by opening your access point’s configuration page and checking the signal strength on your phone.
Make sure that your laptop’s wifi radio is turned on, and that it is not in airplane mode. If your laptop’s wifi radio is turned off, there will be no available networks for you to connect to when you open your hotspot software.
Once the signal strength on your phone indicates a strong connection with full bars, try turning off and then turning on airplane mode again to see if that helps.
If the mobile hotspot is connected but no internet error still persists, you might need to restart your phone and restart your laptop.
On most computers, you can do this by holding down the power button until a menu appears and then choosing Restart or Shutdown > Restart.
Windows 10 Wifi Won’t Turn On (How To Fix It Quick!)
The Windows 10 supremacy on the technology market has got its own pitfalls. From time to time, it can be difficult to get Wifi to turn on.
Typically, Windows 10 won’t connect to wifi when the problems are network-related. This is because most Windows 10 computers have a problem with their wireless card drivers. To fix this issue, you will need to uninstall your network adaptor drivers.
The best way to do this is through your device manager. Go into your laptop or PC’s device manager and uninstall both the wireless network adaptors under the Network Adaptors section, as well as their corresponding monitor devices under Universal Serial Bus controllers.
After you have completed these steps, restart your computer and reinstall the drivers through the internet. This will typically fix the Wifi won’t turn on windows 10 error.
Ethernet Not Working Windows 10, (How To Fix It Quick!)
Ethernet has been widely used for connecting devices to the internet for as long as technology has been in use. Though Ethernet has plenty of benefits, it has its pitfall particularly with Windows 10.
If you are having Ethernet problems with your computer, there are a few things that you can do to fix it.
First, make sure that your Ethernet cable is securely plugged in and the plug is not loose. Second, make sure that your Ethernet controller drivers are up to date by searching for “device manager” in the Windows search bar.
Lastly, you can try restarting your modem and router to see if that fixes the problem. If it does not, call customer service for more assistance or purchase a new Ethernet cable.
Xfinity Wifi Keeps Disconnecting, (How To Fix It Quick!)
Xfinity wife connection to your home offers a plethora of benefits for its customers. From high speed internet to security, Xfinity offers it all.
However, one of the most frustrating things that can happen with an Xfinity wifi connection is having it disconnect and not be able to reconnect. There are a few settings you can look through in order to fix this common problem.
First, make sure that the wireless radio on your laptop is running on top of an updated network adapter driver. If you are not sure how to do this, you can simply go into device manager on your laptop or PC.
The second step is opening the settings for your modem and making sure that it is working properly with Xfinity wifi.
Lastly, try resetting your network cables by unplugging them from the modem and the router. Wait for a couple of minutes to let them reset, then plug them back in. This will typically fix the Xfinity wifi keeps disconnecting problem.
Spectrum Wifi Is Not Working (How To Fix It Quick!)
Spectrum is America’s fastest internet provider. With great speed comes great internet security and Spectrum is no exception.
However, there are times when the speed provided by Spectrum can be disrupted by your home’s wifi failure to work due to network errors, broadband capacity and speed inefficiencies.
With so many home gadgets reliant on internet connectivity to function, home internet service providers like Spectrum are struggling to keep up with home automation devices running at maximum capacity all day and night.
Spectrum offers a variety of home wifi boosters and signal extenders that can help maximize your WiFi speed and range.
The simple way to fix this problem is to contact Spectrum support or visit their website for more information on options for improving the quality of the internet in your home.
Eero Wifi Connection Not Working (How To Fix It Quick!)
Eero is an innovative company that has changed the way people look at home internet speed and connectivity.
Eero’s goal is to be the best wifi router for your home, giving you the freedom of talking on your phone while watching Netflix in another room without any interruptions or buffering.
However, this can be disrupted if your home internet connection is not working properly or if your Eero wifi router is not connecting to other devices.
To fix the Eero’s wifi not working problem, you can follow these steps:
First, reset your eero by unplugging the device from the outlet and plug it back in. Next, you will need to look at both ends of your ethernet cable and make sure they are securely plugged into the router and devices like your laptop or gaming console.
Lastly, if those steps do not work then you will need to reach out to Eero support for more assistance.
No Internet Access Windows 10, (How To Fix It Quick!)
Internet access issues on Windows is not a small problem. There are many things that can cause your Windows system to lose internet access.
Out of date software drivers, malfunctioning firmware, and faulty wireless adapters can all cause your home internet to stop working or trigger Internet access issues in Windows 10.
In order to fix the no internet access windows 10 problem, you will need to troubleshoot each of these causes one by one until you find the problem at hand. This could take a while depending on how long it has been since your last successful connection.
The first step you will want to take in troubleshooting this issue is restarting your computer and modem. If this does not work, you will need to open the network settings on your computer and see if there are any issues with connecting or not.
There may be a red X next to the connectivity icon, in which case it will ask you if you want to troubleshoot the problem.
On this screen, there are several options that can help fix your no internet access windows 10 issue without having to call support or search online for hours on end.
Xfinity Connected No Internet,
When it comes to internet connectivity and accessibility, the two are poles apart. So, if your Xfinity wireless home internet connection is not working properly, probably it is saying ” Xfinity connected but no Internet access, it means your Xfinity router is able to connect to the internet data delivery tunnels but it is unable to deliver the internet connection to you.
There are several reasons behind Xfinity wireless internet service not working properly, some are temporary for time being while others are permanent.
Permanent reasons behind no Internet access through Xfinity can be that your connection wire has been physically damaged or disconnected from the router. here are a few simple solutions you can try to fix the problem quickly.
First, restart your router and modem by switching off both devices for 2-3 minutes and then turn them back on again. You might also want to check if there have been any firmware updates recently that would have caused the problem.
A quick way to check if your Xfinity router is connected or not is to use the online WiFi checker tool from the Xfinity website which will tell you if your connection wire has been physically damaged or any incompatibility issues with the software.
The other, temporary reason behind no internet access in Xfinity can be that your router was not able to establish a connection to the Internet Data Delivery Tunnel.
Windows 10 No Internet Secured,
More often than not, Windows 10 operating system run computers will return an error that says ” Windows 10 no Internet secured”. While it may be easy to fix this problem yourself, it is crucial to remember that you are dealing with your home network security.
If you want to ensure that no one in-between the router and your computer can intercept data traffic over the internet connection, then it is important that you do not take steps that could compromise your network or personal information.
It is common for Windows 10 users to take the route of simply resetting their router or modem. This works fine if you understand what you are doing and don’t mind it as a temporary solution until your home wifi connection has been secured again.
If you suspect that someone else has accessed your network and changed your internet security settings, you should take more care when dealing with your home internet connection. You will want to check your router’s physical connection, specifically the LAN ports that are plugged into your modem or ADSL/Fibre wall socket.
Next, run an online wifi check over the network that you suspect has been compromised. If any other devices show themselves online, you will want to keep in mind that the only way they could have gotten onto your network is through these open ports.
Now we come to one very simple and less technical solution: turning off your Router Firewall ( if there is any). But before you do this make sure that no other device in between your computer and router has been compromised.
Dell Laptop Won’t Connect to Wifi
Despite Dell laptops being reliably good with connecting to the internet via wifi, there are other times when the ” Dell laptop won’t connect to wifi error” pops up on your computer unexpectedly.
There are typically two reasons for this error. The first is that your Dell laptop driver is not up to date and the second is that there could be a compatibility issue with Dell laptops and your router or modem.
Fixing this wifi connectivity issue on your Dell laptop would only take you minutes, if not seconds. First, ensure that both your Dell laptop and router are updated with the latest software.
If they are, then it may be that there was a compatibility issue between your router or modem and your Dell laptop driver. To resolve this problem you would need to update your Dell laptop’s Windows 10 driver on the official website which should fix the wifi connectivity issues.