Blinking red light on broadband internet routers is not a new phenomenon, in fact, every home connected to a local internet service provider is likely to have experienced router red light blinking and Verizon routers red light blinking is as inevitable as Spectrum’s red light flickering error. But, why do Verizon routers start blinking a red light suddenly?
As a general guide, Verizon’s routers begin to blink a red light when they get a malfunction or firmware update gone wrong, no internet connection, low internet capacity to match the demand of connected devices, overheated, or there is some problem with the way power is distributed in the router.
The Verizon router’s red light blinking issue also happens when the firmware of your broadband internet modem gets corrupted.
This may result in several issues related to WiFi connectivity problems, even though your Internet Service Provider often gives an assurance that their service providers can help you set up your router in no time.
Blinking red light on Verizon routers is often accompanied by the internet connection being out of service.
This may be caused due to power fluctuations, which can turn into an everyday headache for any home or office that requires multiple devices connected at once. If you are lucky, all you will need is a reboot, but such instances are rare.
Blinking red light on Verizon routers can be particularly annoying if you were expecting to access the internet.
If it turns out that your blinking red light broadband router is not too old or is still under warranty, then you might want to call up your ISP for repairs. Otherwise, with a bit of error troubleshooting, you can fix the problem yourself.
Verizon Router Red Light: The Causes, And How To Fix It Quick.
Fixing a Verizon Router Blinking Red Light: Things You Will Need.
Before you begin to troubleshoot and fix your blinking red light on the Verizon router, make sure that you have all these things available:
A different router that is functional. A computer with an active internet connection (cable-based or WiFi alternative).
A phone (cellular or landline) which you will need to make a call to your ISP for support if required.
The first step should be to check if the problem lies with Verizon’s broadband service, or the modem itself. To do this, you will need to check if your computer is getting an active internet connection.
If it isn’t, then you may have a problem with the broadband service or the modem (which would call for the need to contact Verizon customer care).
If there is an active internet service, you will now be able to troubleshoot the flickering red light on your Verizon router.
Fixing a Blinking Red Light on Your Verizon Router Using the Power Cycle Method:
Power cycling your router allows you to kickstart the reboot process which is seen in blinking red light Verizon routers. The following steps will help you fix the problem in no time:
Turn off your router and unplug it from its power source (the wall). Leave this powering off for at least 30 seconds. Plug the router back into an electrical socket, but keep the router turned off. Wait another 30 seconds and then turn your router on.
If you’re using a Verizon router with the red blinking light issue, wait another 30 seconds before turning on your modem.
You should see your broadband connection come back on (provided that no one else in the house has been streaming movies). If this does not work, consider resetting the router to fix the blinking red light.
Fixing a Blinking Red Light on Verizon Router Using the Reset Method:
If your router is under warranty, you can try to reset it by holding down a paperclip or pin in its reset button hole for 10 seconds.
If this does not work, make sure that you hold it down for 30 seconds. If neither of these options do the trick, then consider contacting Verizon customer service.
Fixing Your Blinking Red Light on Verizon Router Using Third-Party Help:
If you are using a third-party router to connect to your ISP internet provider, you can contact them directly and ask if there has been a router firmware update that has been deployed and is causing the red light blink.
There has been some instances when a router update patch has been released to fix something by the router manufacturer, only to trigger a blinking red light problem simply because your ISP has blocked your router access following the firmware update. So, make sure that you contact your ISP for further technical support.
Why does my Red Verizon Wireless Router Light stay on?
The main reason why a router light stays on is to signal that service is 100% and if it drops to the lowest threshold, a yellow light may start to flicker or stay on constantly.
If you are experiencing a blinking or constantly lit red light on your Verizon FiOS router, this is likely due to the recent firmware update which was released by Verizon.
If you have just updated the firmware and it is still giving you problems, wait another 24 hours and try again before calling tech support.
The best thing that you can do to fix this problem if you are using Verizon FiOS is to replace the router.
If your warranty has expired, it’s time to look for a new router. You can consider buying one from Verizon or Amazon, but make sure that it will work with your ISP service before you spend any money.
Troubleshooting The WPS Button On Verizon Router To Resolve Red Light Blinking.
The red light blinking on a Verizon router may also be triggered when the router update fails and your router is using an unsecured connection to your internet service provider.
The WPS button allows you to refresh your secure connection on your router as WPS protocol is what runs the most secure connection on Verizon routers.
The below steps will help you fix the problem of the red light on the Verizon router due to an Unsecured connection:
Press and hold WPS until either the front panel solid green, or the power LED solid green (about 10 seconds). Release WPS button. Try an update to your firmware again by repeating step 1.
If none of these work for you, it’s time to call Verizon and see if they can help you fix the problem.
Where is the WPS button on my Verizon router?
Knowing the exact location of the Verizon router’s WPS button may not be as necessary as it will be when you need it the most, but if you are having trouble finding it, here’s the location:
The WPS button is located on front panel of your Verizon router. Now that you know where it is located, let’s find out what the red light blinking means on your Verizon FiOS wireless router.
What does a blinking red light on my Verizon router mean?
A blink of the lights on your Verizon router is essentially a warning sign of pending danger.
Having a solid or blinking red LED light indicate that there has been some kind of problem with your network connection and it is always something to be worried about if you depend on your internet service for work or home use.
If you have a blinking red light on your router, it means that something is wrong with the firmware as well as the connection to Verizon’s servers.
The problem may be temporary or permanent depending on how long it has been flashing and what kind of troubleshooting steps were attempted before calling for help from Verizon.
What should I do if the red light on my Verizon router is blinking?
Do not panic, hold your horses and remain calm. The problem has started by a recent update to the firmware of the router due to which it cannot connect with your ISP’s servers resulting in a blinking red LED Verizon Router Light.
Is the DCHP link down on my router?
Verizon routers are capable of doing much more than simply connecting you to the internet. Unlike other routers, Verizon’s routers are capable of assigning IP addresses based on DCHP.
If your DCHP goes down, you will see a red blinking light on your Verizon FiOS Router.
Conclusion.
A red light on your Verizon router is always something to be worried about, but there are steps that you can take to fix it.
First of all, try updating the firmware if you haven’t already done so. If this does not work for you, you’ll have to replace the router as your warranty has probably expired by now.
If you are unable to find the WPS button, call Verizon for help. If none of these work out for you, it’s time to contact your internet service provider and see what they can do about it.
Having a blinking red light on your Verizon router may seem scary at first glance, but there are ways to fix it and make your internet service as good as it was before the problem started.
