If you have a Nintendo switch, there is nothing more aggravating than discovering that your switch will not turn on. You might be wondering why your switch won’t turn on and how you can get it to turn on. Don’t worry, we’ll explain why your switch won’t turn on and how you can go back to playing your favorite games as soon as possible.
Typically, if your Nintendo Switch won’t turn on, it’s most likely because of a depleted battery, software glitch, and a faulty Nintendo switch charging cord that’s preventing your switch to charge. Look for any dirt, exposed or frayed wires, a bent adapter, or bent pins in the device before using it.
Consider purchasing a new cord if there is any damage. Keep in mind that using a non-Nintendo power cord to charge your Switch could cause it to malfunction.
Generally, many issues beyond the above may cause your switch to not turn on. Some of the causes include charging cable issues, battery issues, software issues, and even hardware faults in some instances.
Problems With the Nintendo Switch Charging Cord. In most cases, the charging code is the most common reason for your switch not to turn on. As a result, you should make sure to inspect your charger for any signs of damage. Furthermore, if the cable is not compatible with your switch, you may try replacing it with one that is compatible with your switch.
Empty or Depleted Nintendo switch Battery. It’s possible that your battery is completely drained and you are completely unaware of it.
The first thing you should know if you are using a switch for the first time is that if the battery is entirely depleted, it will take some time for the screen to glow after you set the console into charge mode.
Make certain that the charging wire is properly connected to the console and that it is left to charge for an extended period.
Nintendo Firmware-related problems. It is not unusual to encounter this exact problem as a result of a software or firmware malfunction. A force restart should be performed as soon as possible if this situation occurs for you. If it doesn’t work, your only other choice is to do a hard reset.
Nintendo switch Hardware failures. After trying all of the solutions mentioned in this article and discovering that none of them work for you, the only alternative is to assume that you’re genuinely dealing with a hardware problem. There is nothing more you can do in this situation other than get your console repaired.
How to Troubleshoot a Nintendo Switch That Won’t Turn On
Now that we’ve gone over every conceivable reason that might be causing this specific problem on your switch, let’s take a look at some of the solutions that are available to you right now. Follow the steps outlined below in whichever order you like to determine if your situation is recoverable or not.
Allow It to Charge
The majority of the time, when a switch refuses to turn on, the problem may be attributed to a depleted battery. This is particularly the case if it has been a long time since the device was last recharged; with time, it may have exhausted even its residual battery power.
Put it in its docking station or connect in the charging cord directly and let it charge for at least 72 hours before using it again. The Switch must be functioning within a few hours, and it will be completely charged in around three hours.
Normally, the screen will still light up with a battery indicator to let you know that it needs to be recharged, but if the battery is completely depleted, it won’t even have the power to do so. Charge it with the official Nintendo Switch Power Adapter that was included with the system and let it for at least an hour before using it.
Perform a Hard Reset on the Switch
After a full charging process and no response from your Switch, or if you can detect weak light emanating from the blank screen, you may have to run a force shutdown on the device. Note that this will not make you lose any of your stored information. Use the following steps to hard reset the Switch
- Start by pressing and holding the power button on the switch for about 15 to 30 seconds.
- Let go of the power button and then wait for a few second
- Press the power button normally.
- If it continues to refuse to power on, you may be dealing with a more serious problem. Contact the switch manufacturer for support to see if they can assist you.
Generally speaking, there are a number of reasons why your switch might not turn on. Problems with charging cables and batteries are just some of the more common causes, but there can also be software or hardware issues.
Finding out that the switch won’t turn on is very frustrating for any gamer. There are a variety of factors that contribute to this. Some of the most prevalent causes are firmware issues, charger faults, battery problems, as well as hardware problems, to name a few.
All of these issues may be resolved quickly and easily by following a few easy actions explained in this post. However, if you continue to have issues after following the steps outlined above, you may want to consider having your switch repaired by a professional.