Why Won’t My TV Turn On?

If you want to watch television but are unable to do so because your television will not turn on, you may be wondering why your television will not turn on. Don’t worry, I’ll walk you through the many reasons why your television won’t come on, as well as how to get it to work.

Typically, a TV won’t turn on if one of the following components is malfunctioning or needs to be reset: TV Power Supply Unit, CABLE BOX, SAT BOX, COAX CABLE, HDMI CABLE, ETC. -Unplug all electronics, including the television, for five minutes to perform a factory reset. Make sure that all of the HDMI and COAX cables are properly connected and tethered.

In general, there are a variety of factors that contribute to your television not turning on. It is possible that the problem is with the television itself, or that the problem is with the power cable. The following are the most frequent reasons why your television won’t switch on:


  • The power cable is not properly connected to the wall outlet.
  • The remote control is not functioning properly.
  • There’s an issue with the television set overall.


What Should I Do If My Television Will Not Turn On?

When your television won’t turn on, you may try a few different things to get it functioning again. It is possible that the television is damaged and must be replaced, but it is also possible that there is a problem with the power cable or a loose connection.

Many different types of cable boxes, satellite boxes, coaxial cables, and HDMI cables fail to turn on because they are either out of alignment or need to be reset. -Reset the TV and all other electronic devices by unplugging them for five minutes. 

All HDMI and COAX CABLES must be properly connected and tethered to each other. Or if you have  a TV that won’t turn on, you must perform a TV soft reset

Unplugging and re-plugging your television after 30 seconds is known as the “TVsoft reset protocol,” which is typically used when your television won’t turn on. A “soft reset” is what we call this method of resetting the TV.

How to Perform a Soft Reset on a Non-Working TV

Turn off your television at the wall and unplug it from the power outlet if it still won’t turn on. Reconnect the device and turn it on after 30 seconds. This is referred to as a “soft reset,” and it is meant to reset the TV’s settings.


Try turning it on at the meter box. If you are unable to switch on your television using the tv remote, it is possible that the batteries in the remote control have run out, or that anything is conflicting with or obstructing the infrared signal from the remote control. To check whether this is the case, switch on the television by pressing buttons you can find on the side panel or front panel of the television screen.


Take a look at the power. Inspect the TV to ensure that it is properly connected to a working power outlet and that it is firmly hooked in. The issue might be with your power outlet instead of with your television; to determine whether this is the issue, try plugging a different electrical device into the Television set’s plug or connecting the Television to a separate electric socket.

If the electricity does not come on, examine the fusebox and see if it has tripped and has to be reset. An expert will be required if the outlet cannot be repaired on your own. It is necessary to get your television fixed if it instantly trips the power circuit.


It is possible that your television is linked to an extension line, and that the fuse or surge protector in this connection has blown. In order to determine whether this is the situation, attach the television straight to the wall.


Soft resets. If the problem persists, try unplugging the tv from the power outlet and turning it off. This may help. Wait 30 seconds before plugging it back in and turning it on. This is referred to as a ‘soft reset,’ and it should help to calibrate the television.


Remove the batteries from the remote control. Unplugging and reinserting your television did not resolve your issue, therefore remove the batteries from your remote control. Ensure that both batteries are entirely removed from the remote. After removing the batteries, press and hold the power button on the TV remote for approximately 15 seconds to turn it on. Next, replace the batteries in the remote and attempt to switch on the television. It should be able to be turned back on.

If your remote appears to be working properly but your TV is not responding, you may need to factory reset it. Your Television set’s power source or other hardware may be faulty, and it may need repairing if this does not resolve the problem.

Take a look at the gadgets. Many different gadgets, including DVD players, cable boxes, and media players, are linked to most televisions. Determine if any power is being delivered to the individual devices by checking all of their connections.

It is most possible that a problem with the power transfer to the television or with the TV’s internals is the cause of the problem. Therefore, the manufacturer should be contacted. 

Depending on the situation, your television might be recalled or may have an easily fixable issue. You might also find out whether the manufacturer is prepared to fix your Television for free.

 If you get in contact with the manufacturer that built your television and explain your situation, they may be willing to lend a hand to you.


Most difficulties are not always caused by your television, but also by external components and problems with power sources. However, you can be able to cope with any scenario that comes your way.

 Make no attempt to fix the television on your own unless you are quite certain in your ability to accomplish the task. There are a variety of things that may go wrong, including the danger of jamming and electric shock. If you are not able to apply a fix, you can call a technician to fix the problems. 


Recent Posts